Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
quality products with their convincing performance data were developed for the multiple purposes involved with
draining and pumping liquids from one place to another.
The typical ranges of application of submersible clean water pumps include: draining of ponds, basins and storage containers
as well as discharging of rain water or seepage.
Submersible clean water pumps from T.I.P. are suitable for stationary or temporary installations.
This product is intended for private use in the home area and not for commercial or industrial purposes or for continuous
circulating.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
When using the unit in a pond, please take the required action to ensure that no inhabitants of the pond will be sucked in.
The pump is not suited to discharge saltwater, faces, inflammable, etching, explosive or other hazardous
liquids. Please observe the max. temperature of the liquids to be discharged stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in case of any
improper operation or damage of the device. The lubricants used are biologically degradable and non-
hazardous to health.
3. Technical Data
Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
1)
Max. flow rate (Q
)
max
Max. pressure
1)
Max. delivery height (H
)
max
Max. submersion depth
Max. size of the solids being pumped
Max. fluid temperature (T
)
max
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
2)
Min. self-priming level (A)
2)
Min. suction level (B)
2)
Cut-in level (C)
2)
Cut-out level (D)
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced outlet.
2)
The values between brackets refer to the illustrations given at the end of these operating instructions.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with connection cable, one connection port, one operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of the application, additional
accessories may be necessary (please refer to the chapters titled "Installation" and "How to order spare parts").
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner.
5. Installation
5.1.
General installation information
During the entire process of installation, the device must not be connected to the electrical
mains.
The pump and the entire connection system have to be protected from frost.
All connection lines have to be perfectly tight since leaking lines may affect the performance of the pump and
cause considerable damage. If required, please use a suitable sealant to make the installation airtight.
TKX 7000
230 V~ / 50 Hz
300 Watt
IPX8
41.91 mm (1¼"), male
7,000 l/h
0.6 bar
6 m
7 m
6 mm
35 °C
30, evenly distributed
10 m
H05RN-F
3.6 kg
100 mm
6 mm
350 mm
80 mm
17 x 17 x 31 cm
30267
2
9
Advertenties
Hoofdstukken
Inhoudsopgave
