Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The app or BrematicPRO PC software is installed and open.
The BrematicPRO Gateway is ready for use.
Keep the device at least 50 cm from the Gateway.
Open the "Settings" menu.
Select the room where you wish to use the device.
Select "Add Device".
Select the frequency "868 MHz".
Under "New Device", select "Switch / Socket" and click "Continue"
to confirm your selection.
Follow the on-screen instructions.
Insert the battery in the battery compartment as described in
the section "Inserting / replacing the battery".
The wireless remote control is in pairing mode when the battery
is inserted.
Press any button on the remote control.
Enter a device name for the wireless remote control e.g. "Living
room remote control".
Note: If the pairing process has failed, remove the battery for
20 seconds. Reinsert the battery and restart the process in the app.
Select "Add" to assign the device to the room.
First tap "Back" to leave the room, then "Done" to complete the
pairing process.
Note: The wireless remote control is fully paired (all button
pairs) once one button has been paired. It is not necessary to
pair every button individually.
Note: The remote control does not have a tile in the app. The wireless
remote control can be linked to other devices via tasks and acts as a
trigger for a task.
Defining button assignment (for direct pairing)
ON
UP
LEFT
button
OFF
DOWN
RIGHT button
Wireless remote control 868.3 MHz
Cleaning the Device
Clean the device with a dry, lint-free cloth. For tough dirt, you
may also slightly dampen the cloth.
Do not clean with solvent-based cleaners. These could damage
the device surface and markings.
Never immerse the device in water or other liquids. The device
may otherwise be damaged.
Action
Problem
Possible cause
The remote control
The battery is
is not working.
drained.
The remote control
is outside the range
of the Gateway /
the wireless
component.
The device LED
The receiver cannot
flashes thrice /
be reached.
command is not
confirmed
The receiver is
defective.
The device LED
The battery is
flashes every
already drained
second.
when you try to
insert it.
Disposal
The packaging is made from environmentally-friendly
materials which can be disposed of through your local
recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life, not in the household waste. Please contact
your municipality for information on collection facilities
and their opening hours.
Action
Insert a new battery.
Reduce the distance
to the Gateway /
wireless component.
Reduce the distance
to the Gateway /
wireless component.
Replace the
defective receiver.
Please contact your
specialist dealer.
Insert a new battery.
EN 13
Advertenties
Hoofdstukken
Inhoudsopgave
