Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
A. NIGHT LIGHT BRIGHTNESS
ADJUSTMENT + VOX
VOX
TRANSMIT
VOX
ON
POWER
Problem
No sound on the receiver
Transmission always on
Audible alarm
permanently activated
Battery life is short
Communication is frequently
interrupted or off
TROUBLE SHOOTING GUIDE
Possible cause
• The microphone's sensitivity is too low.
• The receiver volume is too low.
• The power adapter is not properly connected.
• VOX mode active.
• Batteries are empty/dead.
• The VOX mode sensitivity is too high.
• The receiver batteries are empty/dead.
• Distance between baby and parent unit exceeds
the operating range.
• Night light is permanently switched on.
• The transmitter and/or receiver are located near
other electrical appliances.
• Using the babyphone on a power strip.
• The two appliances are separated by metal
structures, thick walls, floors, etc.
• Baby unit battery has run down.
BABY MONITOR EASY CARE • Instruction manual
OPERATION
E. THE RECEIVER VOLUME
Solution
• Increase the microphone sensitivity.
• Increase the receiver volume.
• Check the connection.
• Press a button to activate the receiver.
• Replace with new/recharged batteries.
• Reduce the sensitivity of the VOX mode (2).
• Replace with new/recharged batteries.
• Move the baby & parent unit closer together.
• Switch off night light or set to VOX operate.
• Move the transmitter and/or receiver away
from sources of interference or re-set
the pairing.
• Do not connect your baby monitors to
power strips.
• Re-locate baby or parent unit.
• Replace with new battery or use AC adapter.
9
Advertenties
Inhoudsopgave
