Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
+
12V dc supply
-
12V dc supply
S
Decoded signal output (C4+ / Clock / D0 Wiegand)
D
Decoded signal output (Data / D1 Wiegand)
Introduction--------------------------------------------------------------------------EN
Wiegand interface compatible with DCS range transmitters. Decodes in four different protocols according to its configuration:
C4+, Clock&Data, Wiegand 26 and Wiegand 37.
Technical Data
Power supply
Frequency
Consumption
Sensitivity
Antenna
Operating temperature
Watertightness
Dimensions
Weight
Installation
Disconnect the power supply before handing the installation in the receiver.
Fitting the casing
The receiver is made up of 4 different parts: a rear cover, a circuit, a curved front cover and an adjustable aerial.
•Secure the circuit to the rear cover.
•Insert the wiring through the holes made for this purpose on the rear cover.
•Fit the rear casing cover to the wall using the rawlplugs and screws supplied.
•Slide the front of the receiver along the guide on the rear cover.
•Screw the aerial into the top of the casing.
Operating
Configuration and connection for the different protocols
Power
Protocol
supply
C4+
+ -
S
Clock&Data
+ -
S=CLOCK and D=DATA
Wiegand 26
+ -
S=D0 and D=D1
Wiegand 37
+ -
S=D0 and D=D1
Signal outlet
SW1 PROTOCOL SW2 PROTOCOL
jcmtechnologies
1
Magnetic detector contact channels 1 and 3
2
Magnetic detector contact channels 2 and 4
3
Contact common
433.92MHz
Better than –100dBm
Incorporated, adjustable
-20ºC / +85ºC
127x70x52mm
OFF
OFF
OFF
ON
ON
OFF
ON
ON
2
12V dc
12.6mA
IP54
143g
Format
---
8 BCD digits
8 fix bits + 16 code bits
---
Advertenties
Inhoudsopgave
