Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SETTING THE AUTOMATIC UP AND DOWN TIMES
There are 8 (1-8) memory locations available for programming the automatic opening and closing times.
An UP and DOWN switching time can be stored in each memory location.
Examples:
Storage space 1: Open switching time for channel 1:
Down switching time for channel 1:
Storage space 2: Open switching time for channel 2:
Down switching time for channel 2:
Storage space 3: Open switching time for channel 3:
Down switching time for channel 3:
Open switching time for channel 4:
Down switching time for channel 4:
Each automatic up and down switching time can be assigned to a particular channel (individual operation)
or all channels can be assigned simultaneously (group operation).
Programming the automatic up and down switching times
(The starting point is the main menu in the display - see"View main menu" page 10):
1. Press the K2 key.
Memory location 1 and symbol for "Up" is displayed.
- The arrows above and below the memory location number indicate whether it is an up or down switching time.
Programming begins with memory location 1 "Up".
- If --:-- is displayed, the channel is deactivated or no time is programmed (continue with point 2).
- If a time (switching time) has already been set - continue with point 3.
2. Press the K3 key to activate the deactivated memory location.
(to deactivate, press the K3 key several times until --:-- appears)
3. Press the K1 key
- the "Hour" indicator flashes.
4. Use the UP and DOWN buttons to set the desired hour of the up-switching time.
5. Press key K1
- the "Minute" display flashes.
6. Use the UP and DOWN buttons to set the desired minute of the up switching time.
7. Press the K1 key.
- The weekdays for the open switching time are displayed.
Possible settings:
- single weekday = e.g. "Tu" for Tuesday
- shortened working week = Mo Tu We Th Fr (Monday to Friday)
- entire working week = Mo Tu We Th Fr Sa (Monday to Saturday)
- entire week = Su Mo Tu We Th Fr Sa (Monday to Sunday)
8. Use the UP and DOWN keys to make the desired setting "day/s" of the up-switching time.
- Pressing the UP and DOWN keys changes the settings or displays of the weekdays.
9. Press the K2 key to confirm the entries.
- The display then changes to the switching time OPEN of memory location 1.
10. Press the K2 key again to access the programming of the down switching time for memory location 1.
- Memory location 1 and the symbol for "Down" are displayed.
- If --:-- is displayed, the channel is deactivated or no time has been programmed.
(continue with point 2, but now the programming of the down-switching time is carried out).
- If a time has already been set - continue with point 3 (but programming the down switching time).
06:00 a.m.
In this example, memory locations 5-8 can be used for
08:00 p.m.
additional, automatic opening and closing times of
06:30 a.m.
your roller shutters (e.g. for presence simulation).
08:30 p.m.
06:45 a.m.
Ex:
Additional open switching time for channel 1:
08:45 p.m.
Additional switch-off time for channel 1:
07:00 a.m.
Additional open switching time for channel 2:
09:00 p.m.
Additional switch-off time for channel 2:
PROGRAMMING
09:00
13:00
21:00
22:00
25
Advertenties
Inhoudsopgave
