Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
12 | English
Cordless dry vacuum cleaner
Recommended chargers
A) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Assembly
Battery Charging
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the Electronic Cell Protection (ECP). A protective circuit
switches the cordless dust extractor off when the battery is
drained.
Do not continue to press the on/off switch after the
u
tool has been automatically switched off. This can
damage the battery.
The battery must be removed from the vacuum cleaner to
charge it.
The battery features NTC temperature monitoring, which
only permits charging in a temperature range between 0 °C
and 45 °C. This achieves a long battery life.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Battery charge indicator
The three green LEDs of the battery charge indicator (3) in-
dicate the state of charge of the battery (4). The battery
charge indicator only illuminates for three seconds after
start-up.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 3 x green
If no LED lights up after switching on, the battery is defective
and must be replaced.
Inserting and removing the battery (see figures A1 – A2)
Do not use force to insert the battery. The battery is de-
u
signed in such a way that it can only be inserted into the
vacuum cleaner when it is in the right position.
– Slide the battery (4) all the way into the battery bay (12).
1 609 92A 516 | (26.02.2019)
– To remove the battery (4), press the release buttons (13)
EasyVac 12
on the battery and pull it out of the battery bay (12).
AL 11..
GAL 12..
Fitting the vacuum cleaner accessories
GAL 12V-...
(see figure B)
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
The vacuum cleaner accessories can be directly connected
with the dust container (6).
See the illustration for the different ways of combining the
vacuum cleaner accessories.
– Insert the individual vacuum cleaner accessories firmly
into the connection on the dust container (6) and into one
another.
Operation
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
Starting Operation
Before extraction, ensure that the filter unit is se-
u
curely fitted.
Do not use damaged filters (e.g. no cracks, small
u
holes, etc.). Replace any damaged filters immedi-
ately.
Switching on/off
– To switch on the vacuum cleaner, press the on/off but-
ton (2).
– To switch off the vacuum cleaner, press the on/off but-
ton (2) again.
Maintenance and Service
Maintenance and Cleaning
Capacity
To ensure safe and efficient operation, always keep
u
≥ 2/3
the dust extractor and the ventilation slots clean.
≥ 1/3
– Clean the housing of the vacuum cleaner occasionally
< 1/3
with a damp cloth.
Reserve
– Clean dirty charging pins using a dry cloth.
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
Bosch Power Tools
Advertenties
Inhoudsopgave
