Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.5 Connecting Power
Models with AC Adapter
Connect the AC adapter power cord to the instrument's power input connector, and then connect the AC plug to a suitable
electrical outlet.
Attention: Only use an AC adapter specified by OHAUS.
Note: Allow equipment to warm up for at least 2 hours for optimal weighing performance.
2.6 Leveling the Equipment
To level the balance, adjust the Leveling Thumbwheels at each corner until the
bubble is centered in the circle.
Be sure the equipment is level each time its location is changed.
2.7 Initial Calibration
For best results, the instrument's calibration should be checked prior to first use. If adjustment is needed, refer to the
Calibration section of the instruction manual.
3. OPERATION
3.1 Overview of Display, Home Screen
This equipment utilizes a touch-sensitive display. Touch areas and Buttons to control the equipment's functions.
CONTROLS
Instructional Messages
Stability (*), Net (NET), Gross (G)
and/or center of zero (>0<)
indicators
Result Fields: Information varies by
application
Touch icons to perform specific
functions or access other functions
3.2 Principal Functions and Main Menu
Weighing:
Press
Taring:
With no load on the pan, press Tare to set the display to zero. Place an empty container on the pan and
press Tare. Add material to the container and its net weight is displayed. Remove container and
container's weight appears as a negative number. Press Tare to clear.
Touch to access application setup menu
Touch to change
applications
Tare
to set the display to zero. Place an item on the pan. Display indicates gross weight.
Touch to access
available libraries
EN-3
Touch for information menu
Touch unit indicator to change
weighing unit
Capacity or Status Guides:
Vary by application
Application Buttons: Functions
vary by application
Advertenties
Inhoudsopgave
