Inhoudsopgave
Advertenties
Once the power assist is turned ON [OLED displays "SD ON"] and the PushTrack-
er is connected to the SmartDrive, the Indication LED will flash blue. When the
SmartDrive motor is driving, the Indication LED will be solid blue. The Indication
LED will flash red when the PushTracker is trying to connect or has lost wireless
connection to the SmartDrive. Whenever there is a change of state to the Smart-
Drive, you will feel vibration as additional indication from the PushTracker.
Display Information
Slowly SINGLE tap the PushTracker Display to scroll through the different items.
It is recommended that you turn OFF the power assist before tapping the
display. Accidental power assist activation may occur if power assist is ON.
Time
Pushes
Battery Level
Coast Time
SmartDrive
Distance
App Connection
Power Assist Activated
When power assist is ON and the SmartDrive motor is driving, the PushTracker
will display your current speed in the units that you have selected [see the "Settings
Menu" section for details on changing]. The Indication LED will light up with vari-
ous colors to notify you of the SmartDrive's current state.
Sleep Mode
Press and hold the Power Assist Button for three (3) seconds to place your PushTracker
into sleep mode. This will help to conserve the battery when your PushTracker is not in use.
PushTracker User's Manual
Displays the current time in 12 or 24 hour format [see
the "Settings Menu" section for details on changing].
Displays the current number of pushes performed
that day. This number resets each day at midnight.
Displays the current battery level of the PushTracker
(PT) and SmartDrive (SD) [from the last time they
were wirelessly connected].
Displays the average coast time [or the time in
between each push - so the higher the number the
better] in seconds for the current day. This number
resets each day at midnight.
Displays the distance driven by the SmartDrive for
the current day in the units you have selected [see
the "Settings Menu" section for details on changing].
This number resets each day at midnight.
Displays when the PushTracker is attempting to connect to
the App [see "Connecting to the App" section for details].
4
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
