Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Overheating protection
This appliance is featured with an overheat protection. Should the temperature exceed safe levels the
appliance will automatically cut off power.
The thermal Cut-out switch is located on the rear of the appliance. To reset the appliance after a sufficient
cool-down period:
1. Unscrew the reset switch cover.
2. Press the small reset switch down until it clicks, using a blunt pointed instrument.
3. The appliance is now reset and can be used as normal.
Cleaning, Care & Maintenance
•
Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or
performing maintenance.
•
If necessary wipe the exterior with a soft cloth and warm soapy water.
•
Dry thoroughly after cleaning.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Overheating protection is activated
Technical Specifications
Model
Voltage
CT931
220-240V~
50Hz-60Hz
Note: Due to our continuing program of research and development, the specifications herein may subject
to change without notice.
CT931_ML_A5_v4_20220823.indb 5
CT931_ML_A5_v4_20220823.indb 5
Probable Cause
Cooking
Power
Current
Surface
Diameter
3000W
13A
400mm
Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the plug fuse
Check mains power supply
Reset the appliance
Temperature
Dimensions
Range
h x w x d mm
50ºC-300ºC
220 x 450 x
470
EN
Weight
20.5Kg
5
2022/8/23 13:51
2022/8/23 13:51
Advertenties
Inhoudsopgave
