Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
sensor and replace the cover.
6. During the installation process, place the re-
mote sensor next to the base unit. Only posi-
tion the remote sensor and the base unit at the
desired place after a successful installation
process and position it within the effective
transmission range.
Time setting
NOTE!
After the clock received the DCF time signal the
time will be set according to the Central Europe-
an time (CET). Summer and winter time change
(and reverse) is also set automatically. Other de-
viating times can be set manually only.
Automatic time setting via DCF time signal
After inserting the batteries the time will be set
automatically via DCF signal. This process may
take a few minutes.
Initiate to receive the DCF time signal manually
NOTE!
Use this function when e.g. automatic summer/
winter time change does not work or the wall
clock temporarely receives no time signal.
1. Press and hold the DOWN button (17) for 3
seconds to start manual search for the DCF
signal.
2. Wait approx. 2-5 minutes until the current time
will be displayed.
3. If the signal for daylight saving time is received
'DST' will be displayed.
Manual time setting
NOTE!
It is necessary to set the time manually in places
where no radio signal is received.
If automatic radio signal reception is enanbled,
the functions of all buttons, except SNOOZE and
DOWN, are disabled. In this case press and hold
GB
17
Advertenties
Inhoudsopgave
