Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. FITTING INSTRUCTIONS (Fig.1)
Join the two parts that form the base of the unit
-
Pass the power cable between the two halves of the base.
-
-
Join the base to the fan body, using the two thumbscrews supplied for this purpose.
-
Fix the power cable in the two rear clips under the base, to prevent the fan from being
unstable
4. USING THE FAN AND CONTROL FUNCTIONS
ARTIC TOWER M Model – (Fig.2)
-
Check that the supply voltage matches the rated voltage on the characteristics plate,
before connecting the device
- Through the rotary switch, select the operating mode:
OFF
ARTIC TOWER E Model – (Fig.3)
-
After verifying that the supply voltage matches the characteristics plate, connect the
device to the ductwork.
-
Control the different functions either using the buttons on the fan's control panel or
with the remote control.
-
There is an illuminated panel that indicates the operating speed and timer mode.
-
ON/OFF With the button ON/OFF, controls the power to the fan.
a)
Speed adjustment
By adjusting speed button, you can select up to three different operating speeds. The
front indicator lights, indicating the selected speed.
Operating mode
Stop
Slow speed
Medium speed
Fast speed
Slow speed with oscillation
Medium speed with oscillation
Fast speed with oscillation
Slow speed
Medium speed
Fast speed
11
Advertenties
Inhoudsopgave
