CompactReader
1. Hold the CompactReader on a vertical line about 15 cm to 20 cm
NOTE
Provide space for opening tool
The CompactReader is opened on the lower shell with the opening tool.
2. Test the range several times with an authorized card.
3. Mark the position (e.g. with a pencil).
4. Remove the cover with the electronics (not clipped in at the fact-
5. Pull off the protective foil of the adhesive surfaces.
EN
above the lock (edge to edge).
Make sure that there is enough space to place the opening tool.
Schließung kuppelt ein.
9
ory).
6. Installation
29 / 124