Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
11. Read the user manual carefully to avoid accidents and other damages.
12. Regularly clean and maintain the bathtub or whirlpool according to the manufacturer's
instructions to prevent buildup of dirt and bacteria and mould growth.
13. In case of a defect, the customer is responsible for the removal of the defective part and its
reassembly.
General information on the mode of action and use
Drain the water after each bath. Never leave children unattended in the tub.
Whirlpool care instructions
The surface is easy to clean and maintain. The smooth surface hardly attracts dirt. Regular
maintenance: sponge, soft cloth, some antistatic cleaning agent. This way, the bathtub retains its
shine and becomes dirt-repellent. Avoid the use of abrasive or solvent-based cleaners that could
damage the surface of the tub. For stubborn dirt, use a liquid household cleaner such as
dishwashing detergent or soap solution (follow dilution instructions). Remove limescale stains with
a limescale remover. Always rinse thoroughly with plenty of clear water and polish with a cloth. Do
not use acidic cleaning agents or vinegar-based cleaners.
Damage
Scratched surfaces should be handled by a professional. Treat with solvent-free polishing paste. If
necessary, the surface can be first treated with wet sandpaper (n°800, followed by n°1200) before
polishing. Do not use any alcohol- or acetone-based solvents. Damages resulting from improper
user handling are not covered by our warranty.
Caution! When wet, the surface presents an increased risk of slipping. This is
particularly the case when using soaps, shampoos, bath oils, etc.
Subject to change
Beliani reserves the right to make changes or product modifications without notice.
Importer:
Beliani GmbH, Haldenstrasse 5, 6340 Baar, Switzerland
19
Advertenties
Inhoudsopgave
