Advertenties
Beschikbare talen
Beschikbare talen
5. Programming
2. Align the unit without touching the ground.
3. Press the device to mount it.
Screws (se-
ü
cure)
ü
1. Unscrew the screws holding the cover in place.
2. Remove the cover.
3. Position the base plate.
4. Screw or anchor the base plate tightly.
5. Replace the cover.
6. Press the cover against the base plate and screw the cover back in
5 Programming
This list briefly describes all programming codes. Enter programming
mode (press 0 for more than 2 seconds) and enter the code.
You will find detailed descriptions on handling in LSM, among other
things, in the detailed manual.
Code
Function (knowledge)
Unlock user with initial PIN
01
30 / 144
Screwdriver (Torx TX6) present.
If necessary, drilling machine present.
place.
Entire input
0 long + 01 + initial PIN +
User PIN (new) + User PIN
(new)
PIN code terminal
EN
Advertenties
Hoofdstukken
