Advertenties
Beschikbare talen
Beschikbare talen
6.3
Connecting the Device
Power
Connect the device to the mains with the power plug.
Power all devices directly off a grounded switched circuit.
Do not connect the device to a rheostat or dimmer circuit, even when using the rheostat or dimmer
channel solely for 0 % to 100 % switching.
Have a qualified electrician carry out the electric connection.
DMX-512 Connection
When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the
other side to the male XLR input of the device. Multiple devices can be linked through serial linking.
The linking cable shall be a dual core, screened cable with XLR input and output connectors.
A DMX terminator is recommended for installations where the DMX cable has to run a long distance
or is in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the
digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor between pins 2 and 3, which is then plugged into the XLR output socket of the last device in
the chain.
7.
Operation
The device can be used in the following modes:
stand-alone mode
master/slave
with a DMX-512 controller.
7.1
Control Panel
Access the control panel functions using the four panel buttons located around the display. From left to
right:
Button
Function
MENU
UP
DOWN
ENTER
Menu
Refer to the illustrations on page 2 of this manual.
7.2
Stand-Alone Mode
The device starts running in stand-alone mode after connection to the mains. This mode allows you to
use the device without controller.
7.3
Master/Slave Mode
The master/slave mode allows for connecting several devices to a single master device in a daisy
chain.
All slave devices will then work synchronously with the master device.
Configure all slave units before connecting the master unit to the daisy chain.
The maximum number of slave units you can connect to a master unit is 18.
V. 01 – 18/10/2016
access the menu
return to a previous menu option
hold pressed to enter the hidden menu
scroll through the menu options in ascending order
increase value
scroll through the menu options in descending order
decrease value
select menu option
store the current menu or option within the menu
HQLE10002
7
©Velleman nv
Advertenties
