Advertenties
Beschikbare talen
Beschikbare talen
English
Accepting door calls
The ringing tones for the
front door and apartment
door are different. When a
visitor presses the door bell,
the telephone rings and the
mute button flashes.
The call can be accepted
within 45 seconds of the
last ring tone.
Actuating the door
release
When you press the door
release button, the door
from which the last call
came is opened for 3 sec
onds.
Switching on the
light
When you press the light
button, the lighting is
switched on, provided this
has been connected by your
electrical installer.
Muting the bell
When the mute button
is pressed briefly, all the
ringing tones are switched
off or on again. The button
lights up red to indicate that
the mute has been acti
vated. If a visitor rings the
door bell while the inhouse
telephone is switched to
mute, the button flashes.
Selecting a door
station
Lift the receiver. Press the
light button twice to make
a speech connection to the
door station from which the
last call came.
Ring tone volume
The ring tone volume can
be set to 5 different levels:
4
Put down the receiver
then press and hold down
the mute button for 3 sec
onds to hear the set ring
tone volume.
Press the mute button
briefly and the volume
increases by one level. After
the highest level it goes
back to the lowest level.
Save the selected
volume by pressing the
mute button for 3 seconds.
Ring tone melody
You can choose between 11
ring tone melodies. The ring
tone is always set for the
door from which the last
call came.
For this reason, first ring
the bell at the front door or
apartment door. (A different
ring tone melody can also
be selected for internal or
group calls).
Advertenties
