Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cutting height adjustment:
The clippers have a 5-stage, cutting height adjustment (0.8 - 2.0 mm).
The cutting height can be changed by turning the setting wheel (fig. 5).
fig. 5
Using the comb accessory:
Make sure that the clipper is switched off when installing and removing the comb. Four combs are available (3, 6, 9, 12 mm) for different cutting
lengths. Place the comb onto the clipping head, making sure that it engages on the side (fig. 6).
Clean and oil the device on a regular basis to ensure the problem-free function and full functional performance of the clippers.
Cleaning the clipping head:
The clipping head must be cleaned when the cleaning symbol lights up.
Switch the device off. Disconnect the device from the power supply. Remove the comb attachment and press in the centre of the shearing blades
to remove them (fig. 7). Remove the hair with the cleaning brush.
Place the clipping head back onto the clippers as shown in fig. 8. Make sure that the locking mechanism is positioned properly and press the
clipping head onto the device until it engages.
Oiling the clipping head:
The clipping head must be oiled when the following symbol lights up in order to maintain the good cutting performance of the clipping head:
Remove the comb attachment. Use the brush to clean the cutting edge, removing the hair between the blades. Oil the locations where the upper
and lower part of the clipping head touch. The device must be oiled immediately when the shearing performance diminishes noticeably or the
temperature of the clipping head seems too high. The device must be oiled immediately when the shearing performance diminishes noticeably or
the temperature of the clipping head seems too high. The clipping head should be oiled once per day when the clippers are not in use.
fig. 6
fig. 7
fig. 8
16
Advertenties
Inhoudsopgave
