Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Mounting
Before mounting this product, read the
Mounting Diagram
Overhead Mounting
Beam-shaping Filters
The Ilumipod ML can be used with the medium, wide, very wide, or asymmetrical beam-shaping filters (sold separately by
Iluminarc). Follow the instructions below to install the optional filters:
Filter retainer ring
Screws
1.
Detach the filter retainer ring by removing the screws attaching it to the fixture.
2.
Place the beam-shaping filter on top of the lenses.
3.
Place back the filter retainer ring on top of the beam-shaping filter.
4.
Screw the filter and the retainer ring back in place.
3
QUICK REFERENCE GUIDE
Safety
Notes. Use at least one mounting point per product.
Beam-shaping filter
Floor Mounting
Ilumipod ML QRG Rev. 3
Advertenties
Inhoudsopgave
