Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
24
become shiny should be ironed in one direction with light
pressure applied.
• Always keeps the iron moving at all times.
• Pure wool fabrics (100% wool) may be ironed with the steam
iron. Set temperature to the one designed for wool, select a high
steam position and use a dry ironing cloth over the material.
NOTE: When ironing woolen fabrics, shining of the fabric may
occur, so it is suggested that you should turn the article inside
out and iron the reverse side.
• Please note, steam functions is not to be used in lowest
temperature setting (dripping may occur).
• Steam ironing eliminates odor and has bactericidal effect.
• Do not run it over metal objects (such as against the ironing
board, buttons, zips, etc.), as it may damage iron's surface. Iron
around any such object.
1. Before cleaning, disconnect the appliance from the mains.
2. Use soft cloth to clean the iron. Do not use solvents or abrasive
products as it may damage this device.
3. Before cleaning, firstly disconnect the device from power mains
and let the appliance cool down completely.
EN
4. Wipe flakes and any other deposits on the soleplate with a
damp cloth or a non-abrasive (liquid) cleaner.
5. DO NOT use chemical, steel, wooden or abrasive cleaners to
scrape the soleplate.
6. Clean the iron with a soft damp cloth.
7. When not using the appliance for a long time, pour out the water
in the tank, and store the iron vertically, on a stable surface.
8. Wind the power cord around the base.
9. WARNING: Do not fill the tank with other liquids than distilled water.
Do not fill the water tank with vinegar or any cleaning liquids!
10. When the iron is cool, treat the soleplate with clean, damp cloth
to remove any remaining impurities and calc flakes.
11. It is advised to perform the cleaning regularly in order to keep
the device in optimum state.
Iron emits an
odor or smoke
Iron does not
steam
CLEANING AND MAINTENANCE
TROUBLESHOOTING
Iron gives off an odor when turned on for the first time.
Oils used during manufacture need to be burnt off. The
odor will disappear after a while.
The water tank may be empty. Unplug the iron from
the mains supply, turn the steam switch to
and add water. Leave the iron for few minutes to heat
(depending on selected temperature), and then set the
steam switch to
Owner's manual
.
Advertenties
Inhoudsopgave
