Download Inhoudsopgave Inhoud Print deze pagina

Jula 071026 Gebruiksaanwijzing pagina 32

Slijperset
Inhoudsopgave

Advertenties

Pneumatic tool
1.
Air hose, inner diameter
2.
3/8''
3.
Lubricating device
Pressure regulator
4.
5.
Filter
Compressed air supply
Check that the relevant compressor provides sufficient air flow.
1.
The tool must always be turned off when it is connected to the compressed air supply.
2.
6.2 bar is the normal operating air pressure for the tool. Excessively high pressure and
3.
contaminated air cause the tool to wear unreasonably quickly, and can also entail a risk of personal
injury or damage to property.
Every day, drain off any water from the compressor's air container and empty the air hoses of any
4.
condensate that has accumulated. Otherwise, water from the air hoses can penetrate the tool and
damage it.
Clean the air intake filter cartridge each week. The chart below shows the recommended
5.
connection.
If hoses are very long (normally longer than 8 metres), the line pressure must be increased to
6.
compensate for the pressure drop. The minimum inner diameter of the hose is 1/4". Couplings
must have the same inner diameter. An air hose with an inner diameter of 3/8" is normally
recommended for optimum tool performance.
7.
Use appropriate hoses and couplings. We do not recommend connecting quick-release couplings
directly to the tool, as they can cause malfunction as a result of vibration. Instead, connect a hose
to the tool and install a quick-release coupling between the air hose from the compressor and the
anti-vibration hose that is attached to the tool.
Inspect each hose for wear before use. Make sure that all connections are secure.
8.
Use
1.
Lubricate the tool before use as instructed in the section
on care and maintenance.
2.
Remove the chuck sleeve by rotating it anti-clockwise,
either by hand or using a spanner, while holding the
chuck mount with another spanner.
ENGLISH
DESCRIPTION
Shut-off valve
6.
7.
Anti-vibration hose
8.
Quick-release coupling
Empty daily
9.
Pipe
and
10.
min. 1/2"
OPERATION
32
11.
Air drier
Pipe
12.
min. 1"
13.
Compressor
connection,
14.
Automatic drainage
Empty daily
15.
and
connection,

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

At-7033b

Inhoudsopgave