Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Display
Press the button to start dispensing filtered water, and press it again to stop. The device will stop automatically in 1 minute. If the tank is in short of
water, the device will not respond even if you press the button.
No light indication:
the device is in standby mode
Flashing purple light when dispensing:
the filter should be replaced soon
Filter lifetime indication and replacement
· With a usage-based filter lifetime monitoring, the indicator will show constant purple light to remind you to replace the filter after 100L or every
30 days, whichever comes first.
· When the filter lifetime is less than 3 days or the remaining filtration capacity is less than 6L, the indicator will flash purple light to notify.
· Filter lifetime reset: press and hold the dispense button for 8 seconds. When the filter lifetime reset is completed, the indicator light will flash blue
light 3 times.
· To prevent the filter from drying out, it should not be left unused for long periods. If such an extended period is anticipated (such as a holiday),
then it is recommended to remove the filter and store it in a sealed plastic bag before putting it in the refrigerator (not the freezer).
Constant blue light:
the device is dispensing water
Flashing purple light and red light alternatively when dispensing:
the filter should be replaced, and the device should be recharged
Flashing red light when dispensing:
the device should be recharged soon
Constant blue light:
the device is fully charged
20
Advertenties
Hoofdstukken
Inhoudsopgave
