Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Monitor
V. Menu operation:
Press MENU to enter the operation:
PAIR
PICTURE
1) Choose PAIR and press OK to enter the pair. The pair will last 30S.
Purpose: To establish connection between the monitor and camera to make the system work
properly.
2) Choose PICTURE and press OK to enter the image set up:
1.
Brightness: 0-5 (press left/right to adjust)
2.
Contrast: 0-5 (press left/right to adjust)
3.
Color: 0-5 (press left/right to adjust)
3) Choose Electronic Label and press OK to turn on/off the electronic label.
The electronic label is only for CAM1.
4) Mirror/Normal image setting: 4 models as below
5) Program Edition No.
Note:
1.Turn on the monitor and under auto search mode press
or the keys cannot work.
2.Under the AUTO mode, if only CAM1 or CAM2 is working, the monitor will switch to the working
CH automatically, if the CAM1 and CAM2 work together, the monitor will show the CAM1 image.
Special notification:
A bright or dark spot on the screen is normal. Please do not open the case of the monitor to repair
it yourself, but inform the distributor or our company. Opening or dismantling the monitor will
cause damage to the screen.
Electronic Label
Nor/Mir
6
Program edition No.
or
to enter the normal mode,
Vedpak 203_Version 1_05.2015
161048
Advertenties
Inhoudsopgave
