Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
COM-126800.6 / COM-126800.7
STRUCTURE ILLUSTRATION
A: Refrigerator compartment
1. Light switch
2. Light and thermostat
3. Glass shelves
4. Drain tube plug
5. Crisper cover
6. Crisper
7. Egg tray
8. Door racks
TRANSPORT AND HANDING
When transportation, hold the base and lift the refrigerator carefully with an angle inferior at 45 degree.
Never hold the door handle as support. Never place it upside down nor horizontally. Push refrigerator on its
basis and place it thanks to its roller feet.
INSTALLATION
To fix stably, the appliance must be placed on a flat and solid surface. It should not be laid on any soft material.
Choose a location where there is no heat source. Keep the refrigerator away from direct sunlight or other
appliance producing heat.
Choose a dry and well-ventilated place where there is no corrosive air.
In order to improve efficiency of the cooling system and save energy, it is necessary to maintain good ventilation
around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around
the refrigerator. Leave 5 to 10 cm between each side of the appliance and the wall, and leave 30 cm between
the top of the appliance and the ceiling.
Pull out the bottom panel before installation.
The appliance can be adjusted by rolling its two legs in front the bottom when it is unstable. Rolling in clockwise
can rise up the machine.
B: Freezer compartment
9. Upper drawer
10. Middle drawer
11. Lower drawer
- 7 -
EN
Advertenties
Inhoudsopgave
