Download Print deze pagina

Hilti BX 3 Originele Handleiding pagina 22

Verberg thumbnails Zie ook voor BX 3:

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 92
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
This symbol is intended to draw your special attention to certain points for handling the product.
1.3
Product-dependent symbols
1.3.1
Symbols on the product
The following symbols are used on the product:
General symbol for "must do"
Wear eye protection
Wear hearing protection
Wear a hard hat
Direct current (DC)
The Bluetooth
wordmark and the
®
tooth SIG, Inc. and Hilti has been granted a license to use these trademarks.
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
Li-ion battery
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
1.4
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Fastening tool
Generation
Serial no.
1.5
Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
16
English
logo are registered trademarks and the property of Blue-
2180111
BX 3 | BX 3-L
02
*2180111*

Advertenties

loading

Deze handleiding is ook geschikt voor:

Bx 3-l