Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Intended Use
The automatic shredder can be used to shred paper and credit cards by inserting them in the
insertion slot. The material to be shred must comply with the requirements stipulated in Technical
Data.
The automatic shredder is not intended for shredding material which does not comply with the
requirements stipulated in the Technical Data (e.g. cardboard). Any other use is considered
unintended use.
Before You Start
Read this operating manual through carefully, observing all the information contained
regarding handling and using the shredder. Keep the operating manual in a safe place
for future reference.
The following information should help to ensure that the shredder always functions as you expect
it to.
Never reach into the insertion slot. Before starting to shred material, remove any staples, paper
clips, rubber bands or other foreign bodies from the material concerned.
Keep all loose pieces of clothing, jewellery, long hair or other loose items away from the device.
Positioning the Shredder Safely
The shredder only operates when fit on the waste bin.
C
AUTION
underside of the cutting mechanism has sharp edges and corners. Do not take hold
of the shredder from the underside.
1
Mount the shredder on the waste bin. The shredder latches audibly in place.
2
Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket.
3
Pay attention that the switch is set to its O
plug to an easily accessible power socket.
! Risk of injury through sharp edges on the cutting mechanism. The
position and then connect the power adapter
FF
13
Advertenties
Inhoudsopgave
