Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Saneo B, Saneo C
➤ Clean and grease all seals and moving parts of the toilet and the cassette tank
(chapter "Cleaning and maintenance" on page 25) and repeat this operation
before putting the toilet back into service.
7
Cleaning and maintenance
!
CAUTION!
Cleaning agents for the toilet may not contain chlorine or alcohol!
A
NOTICE!
•
To prevent material changes, do not use hard, abrasive or soda-
based cleaning agents (scouring agents).
•
Do not use polish for cleaning.
I
NOTE
For regular cleaning of the toilet bowl, use a mild colourless cleaning
agent.
➤ Clean the toilet regularly inside and out with a soft cloth and lukewarm water with
a mild cleaning agent.
➤ Then wash the surfaces with clear water.
➤ Clean and grease all seals on the toilet and cassette tank regularly. In case of
frequent use, perform these actions monthly or after 3 – 5 drainings of the
cassette. Use grease or silicone-based spray.
The manufacturer recommends:
•
®
Grease: OKS
1110
•
Silicone spray: OKS
7.1
Cleaning the flushing nozzle
➤ Pull the cover away from the flushing nozzle (fig. c, page 7).
➤ Remove any dirt or debris with a cloth or soft brush.
➤ Put the cap onto the flushing nozzle (fig. d, page 7).
EN
®
1111
Cleaning and maintenance
25
Advertenties
Hoofdstukken
Inhoudsopgave
