Advertenties
Beschikbare talen
Beschikbare talen
Function and Control panel
1. Mode button: Choose to work in automatic or DMX mode
2. Menu button: In automatic or DMX mode, select different functions
3. Up button: Select UP.
4. Down button: Select DOWN
5. Output sockets
6. Green LED: Indicate the output of related channel
7. Display: Display all kinds of operating modes.
8. Output fuse: Fuse for each channel (6.3A).
Always replace with same type of fuse and always disconnect unit from main power before replacing the fuse.
9. Power switch
10. Power Wire
11. DMX input
12. DMX output
Operation
The unit has two operation modes, 4-channel chase and DMX 1 channel, 2 channel and 4 channel dimmer.
Chase mode
The unit has 16 inner programms. You can set the speed and brightness of the chases.
1. Connect lights.
2. Press "MODE", select P1 or P16
3. Press "UP" or "DOWN", select P1 – P16
4. Press "MENU", display SP01 of SP99
5. Press "UP" or "DOWN", select SP01 – SP99, 01 for the 30sec step and 99 for the fastest 10 steps per second.
6. Press "MENU", display D00 – D100
7. Press "UP" or "DOWN" to select brightness. 99 for brightest.
DMX mode
The unit can receive 1 channel, 2 channel of 4 channel DMX signal.
1. Connect the unit to a DMX controller
2. Press "MODE", display A001 – A512
3. Press "UP' or "DOWN" to select the DMX channel
4. Press "MENU", display CH01 or CH04
5. Press "UP" or "DOWN", CH01 to CH04
CH1 means all the units outputs receive the selected DMX value.
CH2 means unit is in 2 channel mode. CH1 and CH2 are one DMX channel. CH3 and CH4 are second DMX channel.
CH4 means unit is in 4 channel mode. All 4 outputs have there own DMX channel
6. DMX value is the brightness of dimming. 0 is Off, 255 is brightest.
Advertenties
