Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
23.
Never leave the appliance unattended during use.
24.
This appliance is not designed for commercial use.
25.
Do not use the appliance for other than intended use.
26.
Do not wind the cord around the appliance and do not bend it.
27.
Do not operate the appliance without water to avoid damaging the heating elements.
28.
Do not wind the power cord around the appliance during storage. This could cause damage to the cord
and lead to danger of short circuit, electric shock or fire.
29.
Should you accidentally allow the kettle to operate without water; the boil-dry protection will
automatically switch it off. If this should occur, allow the kettle to cool before filling with cold water
and re-boiling.
30.
Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
31.
Do not touch the hot surface. Use the handle or the button.
32.
Extreme caution must be used when moving an appliance containing hot water.
33.
The kettle is for household use only, not for outdoor.
34.
Our warranty does not cover water kettles that malfunction resulting from failure to descale.
35.
Do not boil anything but water in this water kettle.
HOUSEHOLD USE ONLY
PARTS DESCRIPTION
1. Lid
2. Handle
3. Water Gauge
4. On/Off Switch and indicator light
5. Filter
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you clean your kettle before use by
boiling a full kettle of water twice and then discarding the water.
OPERATION OF YOUR KETTLE
1.
Open the lid; pour out left over water from previous boiling cycle and fill with the desired amount of
fresh water to the water kettle. Always fill the kettle between the minimum and maximum marks. Too
little water will result in the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before connecting the power cord to the outlet.
2.
Connect the plug into a power outlet. Press the switch downwards. The indicator will light up. Then
start to boil the water. The kettle will switch off automatically once the water has boiled. You can shut
off the power by pressing the switch upwards at any moment during boiling water.
NOTE: Ensure that switch is clear of obstructions and the lid is firmly closed. The kettle will not turn off
if the switch is constrained or the lid hasn't been closed.
3.
Take the plug out of the outlet. Lift the kettle then pour the water.
NOTE: Once the water boils, wait 10 seconds before pouring out water to prevent hot steam from
exiting through the lid of the kettle. operate carefully when pouring the water from your kettle as
boiling water will scald.
4.
The kettle will not re-boil until the switch is pressed downwards. Allow to cool for 30~40 seconds
before reopening to boil water. Never re-boil water older than 2 hours.
- 3 -
Advertenties
Inhoudsopgave
