Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
To use the timer press the timer button
indicator light will illuminate. Press the Increase
cooking time (Range: 0 - 180 minutes).
•
Pressing the on/off button
to run for 1 minute to cool the appliance, then switch off automatically.
Energy saving function
If the appliance is switched on with inactivity for 2 hours, it will switch off automatically.
Cleaning, Care & Maintenance
Disconnect from the power supply and allow the appliance to cool before
cleaning.
•
Use warm, soapy water and a damp cloth to clean
the appliance.
•
DO NOT use abrasive cleaners or pads.
•
Dry thoroughly after cleaning.
•
A BUFFALO dealer or qualified technician should
carry out repairs if required.
•
There is a removable air filter on the bottom of the
appliance. Pull it out of its slot and clean with a
vacuum cleaner.
Troubleshooting
If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
"E0" on Display
No/Unsuitable cookware
"E1" on Display
Appliance has overheated
"E2" on Display
Temperature of pan is too high
(Pan is dry or empty)
"E3" on Display
Input voltage is too high/low
CP799_ML_A5_v5_20210430.indb 5
CP799_ML_A5_v5_20210430.indb 5
. The LCD display will switch to Timer and the Timer
or Decrease button
during use will stop the operation immediately. But the fan will continue
Probable Cause
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Replace with suitable cookware
Check ventilation slots for blockages. Allow to
cool before attempting to use again.
Remove cookware. Allow to cool before
attempting to use again.
Make sure the mains power supply is suitable
for the appliance.
to select the desired
Removable air filter
Solution
UK
5
2021/4/30 16:52
2021/4/30 16:52
Advertenties
Inhoudsopgave
