Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Technical Data
Wet-Dry Diamond Saw
Rated voltage:
Power input:
Rated current
Order Number:
Frequency:
No-load speed:
Max. disc diameter:
Spindle connection:
Cutting depth max.:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accessories:
Item
Diamond cutting disc 125 mm
Groove cutting disc 125x6 mm
Diamond curve disc 115mm
Guide rail 750 mm
Guide rail 1500 mm
Set of 2 suction holder for guide rail
Cutting table ETT 700
Cutting table ETT 1200
Broadening of the support surface for ETT
Industrial Vacuum Cleaner DSS 25 M
Content of Delivery
EDS 125 with diamond cutting disc Ø 125mm, tool kit and operating
instructions in a case.
Application for Indented Purpose
The Wet-Dry Diamond Saw is intended for professional use and may only be
operated after being fully installed in accordance with the installation
instructions.
With the appropriate diamond cutting disc, the EDS 125 can be used to cut
tiles, ceramics and natural stone as well as for joint renovation by wet and
dry cutting.
During wet cutting, the diamond cutting disc must be cooled with water from
the available water supply. During dry cutting, vacuum removal of the dust is
absolutely essential.
Only diamond cutting discs recommended by the manufacturer should
be used.
EDS 125
230 V ~
1250 W
0660V000
50 - 60 Hz
12.000 rpm
125 mm / 5"
Ø 22.2 mm / 7/8"
36 mm / 1 3/8" (without guide rail)
II
IP 20
ca. 2,8 kg / 6,4 Ibs.
EN 55014 and EN 61000
15
110 V ~
11,4 A
0660Y000
Order No.
3744B000
37446000
3744A000
37461000
37462000
37464000
09801000
09802000
09803000
09917000
Advertenties
Inhoudsopgave
