Download Inhoudsopgave Inhoud Print deze pagina

Unpacking Instruction - Power Dynamics PDX350 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 6

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CAUTION LASER RADIATION!
This device is equipped with two Class 1 laser diodes. To ensure a safe operation do not remove any covers or try to
access the inside of the equipment. The inside of the device does not contain any parts which are subject to
maintenance. Maintenance must only be carried out by qualified staff.
OVERVIEW BACK PANEL
1.
Line output jacks
Plug one end of the included RCA cable into line output jacks on the rear panel. Plug the other end of the RCA
connectors into any available line input jacks on your mixer.
2.
Power input
Plug in the included power cord of the PDX350.
3.
Control cable
Plug the included control cable into the PDX350. Be careful when plugging in these cables, never force the cable into
its socket.
3

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

172.715

Inhoudsopgave