Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Features and operation
Connect the mains adapter to the product (7).
1.
Connect the AC adapter to your wall socket.
2.
The LED display shows "HELLO".
3.
Setting the clock
Press the time setting button (10) for 2-3 seconds. The hours begin to flash on the clock
1.
display. Press the + or - buttons on the arms to increase or decrease the hours.
Quickly press the time setting button again to change the minutes. The minutes begin to
2.
flash on the clock display. Press the + or - buttons on the arms to increase or decrease
the minutes.
Quickly press the same time setting button to choose 12hr or 24hr mode. Press the
3.
button on the arm to choose between the two modes. Quickly press the time setting
button again to complete the setting. If 12hr mode is selected, the AM or PM icon will
appear on the screen.
Setting the alarm
Press the alarm setting button (9) for 2-3 seconds. The hours begin to flash on the clock
1.
display. Press the + or - buttons on the arms to increase or decrease the hours.
Quickly press the alarm setting button again to change the minutes. The minutes begin to
2.
flash on the clock display. Press the + or - buttons on the arms to increase or decrease
the minutes.
The alarm time will automatically adjust to 12hr or 24hr mode, depending on what the
3.
user has previously chosen.
Once the alarm is set, short press the alarm button to see what time the alarm is set for.
4.
The alarm time is displayed for 3 seconds, then returns to the current time.
The movable switch on the left ear (5) is used to turn the alarm on or off. When the ear
5.
is vertical, the alarm is off. When the ear is tilted, the alarm is on. When the alarm is
activated, it will play music for a maximum of 2 minutes and then turn off automatically.
Place the ear in the vertical position to manually silence the alarm.
Note: the alarm icon is displayed on the LED screen when the alarm is activated. When the
alarm sounds, the screen displays the message "HELLO", then displays the time again.
Music and alarm sounds
To choose the music, press the music button (11) to scroll through the different songs
•
available.
01, 02 and 03 appear on the LED display for 3 seconds to indicate which song is set (the
•
same song is used for the alarm).
Turn the rear knob (8) clockwise to increase the music volume from 10% (minimum) up
•
to 100% (the same volume setting is also used for the alarm)
•
The music keeps playing until the user long presses the music button for more than 2
seconds.
The alarm volume will increase for 30 seconds until it reaches the volume set by the user
•
via the volume control.
- EN 13 -
Advertenties
Hoofdstukken
Inhoudsopgave
