Download Inhoudsopgave Inhoud Print deze pagina

ETNA KCS7178NFT Gebruiksaanwijzing pagina 59

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

FAULTS
Symptom
Appliance makes a noise.
The door does not open
easily.
The LED lighting does not
work.
Ice building up.
Possible cause
Incorrect positioning of food
in the appliance.
There is an object against the
appliance.
The appliance is cooled by a refrigeration system with a
compressor (and with some models, also a fan) that makes
a noise. The noise level depends on the installation of the
appliance, its correct use and its age.
When you connect the appliance to the power supply the
noise made by the compressor or flowing refrigerant may be
slightly louder. This is not indicative of a defect, and has no
effect on the service life of the appliance. The appliance will
make less noise after a while.
The appliance may be temporarily noisier after the door has
been opened for too long or too frequently, a large quantity
of fresh food has been put in the appliance or the intensive
cooling function has been activated.
You are trying to open the appliance's door just after you
have closed the door. Then opening the door is difficult. When
you open the door, cold air escapes from the appliance and is
replaced by warm air from the surroundings. As this air cools
a slight vacuum is created that makes it more difficult to open
the door. The situation returns to normal after a few minutes,
and the door opens easily again.
LED-lamp faulty.
Freezer compartment door not
closed properly.
The door seals are dirty or the
seals are damaged.
Door seals not installed
correctly.
Solution
Place foods in the proper
manner in the appliance.
Remove the object.
Consult a service technician
about LED lighting that is not
working. For safety reasons,
you are not allowed to repair
LED lighting yourself.
This product contains a light
source of energy efficiency
class E.
Make sure that the door is
closed properly.
Clean the door seals. Call the
service centre if the door seals
are damaged.
When changing the direction
of rotation of the door, the
door seal must be turned
180°. Check if this is correct.
EN 29

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave