Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATING THE APPLIANCE
When the intensive cooling function is not switched off manually, the function will be
switched off automatically after about six hours.
ECO function
This appliance has an ECO function. The ECO function has no time limit and remains activated
until the function is disabled.
Activating/disabling the ECO function
1. Touch the ECO key.
The corresponding indicator flashes three times and you will hear an audio signal.
▷
▷
'E' appears in the display and the indicator stops flashing to indicate that the function is
activated.
2. Touch the ECO key again.
The corresponding indicator flashes three times and you will hear an audio signal.
▷
In the display, 'E' disappears and the indicator goes off to indicate that the function is
▷
deactivated.
▷
The temperature returns to the latest temperature setting.
Selecting the intensive cooling function while the ECO function is activated immediately
deactivates the ECO function.
If you set a different temperature while the ECO function is active, the ECO function
remains active.
Switching the appliance off ( to standby) and back on again
1. First set the temperature to 8 °C.
2. Then simultaneously touch and hold the function key and the ECO key for 5 seconds.
▷
The lighting goes off and 'St' / 'bY' appears in the display; the appliance is now
switched off (standby).
3. Switch the appliance back on by simultaneously touching and holding the function key and
the ECO key for 5 seconds.
The error indicator may flash and error code 'E' / '10' may appear in the display because
the temperature in the appliance is still too high. The error code will disappear when the
appliance has reached the correct temperature.
EN 17
Advertenties
Hoofdstukken
Inhoudsopgave
