Advertenties
Beschikbare talen
Beschikbare talen
PerfectCharge/PerfectPower
Connecting the converter to be switched on via an external switch
➤ Connect the connecting line to an external switch (fig. 5 B, page 4).
➤ Set the main switch (fig. 1 6, page 3) on the back of the converter to "0"
permanently.
7.3
Connecting power consuming devices to the
converter
➤ Loosen the screw (fig. 4 2, page 4) from the positive terminal (red) (fig. 4 4,
page 4).
➤ Push the cable lug (fig. 4 3, page 4) of the positive cable of the power consum-
ing device into the positive terminal (red) (fig. 4 4, page 4) and attach it using
the screw (fig. 4 2, page 4) and the spring washer (fig. 4 1, page 4).
➤ Connect the negative cable of the power consuming device in the same way to
the negative terminal (black) (fig. 4 4, page 4).
EN
Connecting the converter
15
Advertenties
