Advertenties
Beschikbare talen
Beschikbare talen
A few remarks on cutting hair
∙ Before each use, always put a few drops
of acid-free oil between the trimming
comb and the trimming blade.
∙ Always start with the largest push-on
comb.
∙ The hair should fi rst be combed, and
then generally cut against its natural
direction.
∙ For longer hair-cuts use a push-on comb
or a normal comb.
∙ Cut from bottom to top with the trimming
comb lying against the head; lead the
appliance upwards through the hair,
moving it gradually away from the head
at the same time.
∙ For a shaped cut, reverse the appliance
and shorten the hair from top to bottom
without using the push-on comb.
∙ The thinning head is useful for thinning
out certain parts of the hair by a third,
eg for modern, short-style hair. Cut the
areas to be thinned against the natural
direction of growth.
Cleaning and care
General
∙ It is essential to switch off the appliance
and remove the adaptor from the wall
socket before cleaning and oiling.
∙ For safety reasons, the electric hair
trimmer and the adaptor must not be
immersed in liquid or even allowed to
come into contact with liquid.
∙ If necessary, the housing may be wiped
with a smooth dry cloth.
12
Trimming head
∙ After each use, remove the hair from the
trimming comb and the blade with the
cleaning brush. The trimming head can
be removed for cleaning by using the
thumbs to push down the two release
buttons towards the base.
∙ After cleaning, and also after the
appliance has been used for approx.
25 minutes, put a drop of acid-free oil
between the trimming comb and the
trimming blade on each side, and then
switch the appliance on briefl y to ensure
that the oil is well and evenly distributed.
Regular oiling guarantees good cutting
performance over a long period and thus
a long service life.
∙ During periods of non-use, the thinning
head can be used as a protective cover
for the trimming head.
Advertenties
