Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FURNO 300
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play
with the appliance.
• Keep the appliance and its cord out of reach of children aged less
than 8 years.
MAINS CONNECTION (UK only)
This Heat Gun has been supplied with a fused cordset. This is identified
by the fuse holder in the base of the plug. Please read the following
safety instructions before use:
1. If the cordset is damaged replace with a new cordset to avoid
a safety hazard. Please contact Wagner customer services for a
replacement cordset.
2. NEVER under any circumstances use the Heat Gun or cordset
without the fuse cover fitted. This is the little cover fixed into the
base of plug to hold the fuse in place.
3. If you lose the fuse cover then please contact any electrical dealer
for a replacement or ring our helpline.
4. A replacement fuse must be rated at 13 Amps. This must be
manufactured and approved to BS1362.
5. IF IN ANY DOUBT PLEASE CONSULT A QUALIFIED ELECTRICIAN
MAINS CONNECTION (Non-UK)
This Heat Gun has been supplied with a cordset. If the cordset is
damaged replace with a new cordset to avoid a safety hazard. Please
contact Wagner customer services for a replacement cordset.
IF IN ANY DOUBT PLEASE CONSULT A QUALIFIED ELECTRICIAN
WARNING - Use an extension cord that will accept the plug on the
product. Make sure your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord will cause
a drop in line voltage resulting in loss of power and overheating. A
harmonised H05RR-F 3 x 1.0sq mm rubber type cord is required as a
minimum for general use.
Using the Heat Gun
General Description
This Heat Gun is a quality power tool. Like any power tool, it can be
dangerous when misused. Read the following instructions carefully and
follow all safety precautions. It is the responsibility of the owner to use
the Heat Gun properly.
Specifications
Housing
Engineered high-impact corrosion and heat-
resistant polymers
Wattage
1600 Watts on HIGH, 800 Watts on LOW
Voltage
220 - 240 V a.c.
Frequency
50 - 60Hz
Heat Output
Approximately 575°C on HIGH, approximately
400°C on LOW
Weight
0.72 kg
EN
5
Advertenties
Inhoudsopgave
