Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Mounting
Before mounting this product, read the
Mounting Diagram
Overhead Mounting
Beam-shaping Filters
The Ilumipanel LL can be used with the medium, wide, very wide, or asymmetrical beam-shaping filters and a milky filter
(all filters sold separately by Iluminarc). Follow the instructions below to install the optional filters:
Filter retainer lid
Screws
1.
Detach the filter retainer lid by removing the screws attaching it to the fixture.
2.
Place the beam-shaping filter on top of the lenses. Ensure the glossy side of the filter is facing OUT.
3.
Place back the filter retainer lid on top of the beam-shaping filter.
4.
Screw the filter and the retainer lid back in place.
3
QUICK REFERENCE GUIDE
Safety
Notes. Use at least one mounting point per product.
There are 4 screws required per side to
anchor the fixture for a total of 8 screws.
Beam-shaping filter
Floor Mounting
Ilumipanel LL QRG Rev. 5
Advertenties
Inhoudsopgave
