Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.Switch OFF the oven
2.Reset the timer
Note: Your oven will be inoperative until you reset
In the example shown, cooking time has been programmed first; the ready time was
calculated automatically and was edited by us. It is also possible first to program
the ready time. In that case, the cooking time will be calculated automatically and
should be edited thereafter.
IN CASE OF MAINS POWER LOSS
Your oven will be inoperative for security reasons. At that time, the clock will appear
as a flashing 0:00 together with the 'A' symbol. Any cooking program in progress will
also be cancelled. The clock will appear 0:00, it should be corrected. Firstly, enter
manual mode and adjust the clock using '+' or '–' buttons.
Note: In case of short duration mains power loss, system will be conserved itself.
Note: If you will not use your oven right now, be sure that that it is in 'OFF' position.
Flashing 'A' Shows That The Owen Is Inoperative And You Should Enter Manual Mode In Order
To Return Normal Working Conditions.
ADJUSTING THE BUZZER TONE:
You may adjust the hearing buzzer tone of the timer.
1- Pressing '–' button, you can hear the current buzzer tone.
2- Releasing and pressing again '–' button will switch to the next tone.
(3 Different tones available)
3- The buzzer tone will be set to the last adjusted tone.
Note: As factory setting, the buzzer volume is set to the high tone. In case of a
long power loss, the set buzzer tone will be this one.
Advertenties
Hoofdstukken
Inhoudsopgave
