Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• If you have connected a reversing camera to the connector VIDEO 2 IN, connect the green cable
"reversing wire" to the terminal that carries +12 V when the reverse gear is engaged.
This cable automatically switches the video input to the VIDEO 2 IN input (signal of the
reversing camera) if the reverse gear is engaged. It can be connected to the cable of
the reversing light, for example.
• If you wish to connect a playback device to the monitor temporarily only, connect its AV output
to the adapter cable enclosed (yellow = video, red = audio).
• Plug the phone jack of the adapter cable into the AV IN input (6) on the front of the monitor.
The connector VIDEO 1 IN will be deactivated as long as the adapter cable is plugged
in.
• If you wish to use a headset, plug its connecting cable into the headphone (7) connector on the
front of the monitor.
The inbuilt loudspeaker of the monitor will be deactivated as long as the headset is
plugged in.
Operation
(1) ON/OFF switches the monitor on/off
(2) MODE switches between different screen settings
DEFAULT
Basic settings
High-contrast screen setting
VIVID
SOFT
Soft screen setting
LIGHT
Bright screen setting
Personal screen setting
USER
(3) "-" turns the volume down or changes settings in the menu
(4) MENU is used to access the menu – the menu points are accessed by pressing several times,
settings are performed via the "-" and "+" keys
Brightness adjustment
BRIGHT
CONTRAST
Contrast adjustment
COLOR
Colour adjustment
Volume adjustment
VOLUME
SOURCE
Selection of the input: VIDEO 1 IN/VIDEO 2 IN
MODE
Switching of the display format (16:9/4:3)
Reflection and/or rotation of the screen display
TCON
RESET
Restoring factory settings
(5) "+" turns the volume up or changes the settings in the menu
(6) AV IN for the connection of external AV devices
(7) Headphone socket
(1) POWER switches the monitor on/off
(2) VIDEO SELECT switches the video input (VIDEO 1 IN/VIDEO 2 IN)
(3)
turns the volume up or changes the settings in the menu
(4) MENU is used to access the menu – the menu points are accessed by pressing several times,
settings are performed via the "
(5)
turns the volume down or changes the settings in the menu
(6) MODE SELECT switches between different screen settings (see above for features)
All manuals and user guides at all-guides.com
- or " and "+ or
" keys (see above for features)
Fuse replacement
If it becomes necessary to replace a fuse, make sure that only fuses of the prescribed type and
nominal current are used (see "Technical Data").
You must not carry out your own repairs to fuses or bridge the fuse holder.
• Disconnect the monitor from the power supply.
• Open the fuse holder in the lead wire.
• Remove the defective fuse and replace it with a fuse of the same type.
• Close the fuse holder again.
• Only then the monitor should be re-connected to the car system and put into operation.
• Should the fuse trigger again, have the device repaired in a specialist workshop.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the
household waste!
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Remove the battery in the remote control and dispose of it separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable
batteries. Do not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to in-
dicate that disposal in the domestic waste is forbidden. The symbols for the relevant
heavy metals are: Cd=Cadmium, Hg=Mercury, Pb=Lead (marking can be seen on the
battery/rechargeable battery, e.g., underneath the rubbish bin symbol shown on the
left).
You can return used batteries/rechargeable batteries free of charge to any collecting
point in your local community, in our stores or in any other store where batteries/re-
chargeable batteries are sold.
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage..................................................12 V/DC
Power consumption..............................................300 mA
Battery for remote control ...................................3 V lithium button cell CR2025
Fuse .........................................................................T2AL/250V (5 x 20 mm)
Display size ............................................................17.8 cm (7")
Display format........................................................16:9
Definition ................................................................800 x 480
TV format ................................................................PAL/NTSC
Dimensions (without mounting frame) ..............172 x 114 x 24 mm
Installation opening ..............................................177 x 120 mm
Mounting depth .....................................................18 mm
Range of operating temperature ........................0 – 50 °C
Weight .....................................................................300 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
Advertenties
Inhoudsopgave
