Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems
Machine
does
start running
Machine stops during
operation
In case of any doubt, always contact your supplier!
Technical specification
Item no.: 230688
Operating voltage and frequency: 220- 240V~ 50/60Hz
Rated input power: 1,680W
Protection class: class I
Waterproof protection class: IP23
Maximum capacity: 2,5L
Remark: Technical specification is subjected to change without prior notification.
EN
8
Possible causes
Protective cover (10) is not in properly closed
position.
not
Jug (7) is not placed properly.
Power switch (1) is not pressed
Built-in overloading safety activated.
Possible solution
Check to make sure the protective cover (10)
is closed properly.
Check to make sure the jug set (7) properly.
Press the power switch (1)
- Switch OFF the machine by pressing the
switch (1) to "0" position and unplug the
machine.
- Leaving the machine for cooling down for
about 30 minutes and then start again.
Dimension: 252x258x(H)547mm
Net weight: approx. 9,7kg
Noise level: approx. 85dB(A)
Rotation speed without loading (rpm):
approx. 24,800 +/- 10%
Advertenties
Inhoudsopgave
