Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
MAINTENANCE
Removing grease filters
Replacing the carbon filter
1. Switch off the motor and lighting.
2. Open the glass screen completely.
3. Push in the handle of the filter and remove the grease filter.
Use a carbon filter if the cooker hood is not connected to an exhaust duct.
Centre the carbon filter on the motor frame and turn it to mount it to the
motor frame.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease filters
are cleaned.
• The carbon filter must be replaced or cleaned at least every six
months.
• The regenerable activated carbon filters can be washed by hand or
in the dishwasher up to max. 4 times at a maximum temperature of
65 °C. The washing cycle must be done without other dishes and
without dishwasher detergent. Do not use any cleaning agents!
• Remove excess water. Be careful to avoid damaging the filter.
Let the filter dry in the oven for at least 1 hour at a maximum
temperature of 80 °C. After a maximum of 3 years (or when the filter
is damaged), the filter will need to be replaced.
• It is important that the grease filters and the regenerable activated
carbon filter are properly dried before installation.
EN 7
Advertenties
Hoofdstukken
Inhoudsopgave
