Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
P12DSP / P15DSP
DESCRIPTION
1. XLR INPUT
Connect on XLR a device as CD player, VCD player or DVD player.
2. XLR OUTPUT
Connect this output to the input connector of a XLR input of a second speaker or an external power amplifier.
3. MAIN LEVEL CONTROL
Use to adjust the main level signal
4. LOW TONE CONTROL
Adjust bass tone control to required perfect bass sound effect
5. TREBLE TONE CONTROL
Adjust treble tone control to required perfect bass sound effect
6. POWER LED
This led lights on when speaker is on.
7. SIGNAL LED
This led lights on when get signal.
8. CLIP LED
This led give you a visual information about main signal level.
-
If the led stays off, that means the level is ok et no problem for woofer and driver unit.
-
If the led flicks, that means the level is good but stop to increase it or you can destruct the woofer or driver unit.
-
If the led stays on, that means the level is to high. decrease the level of each input device in using corresponding level control buttons
9. POWER SWITCH
Select the "On" position to switch the speaker on
10. AC SOCKET + FUSE
Before to connect the ac cord on this socket, make sure that the available voltage is not higher than stated at the end of this manual
The ac fuse is integrated on the power connector. It's used to avoid power supply default on speaker. if the ac cord is connected and
power switch push on the position on but speaker doesn't work, please check the fuse. if the fuse is out of order, replace it by fuse with
same size and same value.
© Copyright LOTRONIC 2016
All manuals and user guides at all-guides.com
1
2
9
WWW.LOTRONIC.COM
6
7
8
5
4
3
10
5
Advertenties
Inhoudsopgave
