Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Treat any damage to the charging station with anti-corrosion paint.
21. TRANSPORTATION AND STORAGE
The charging station must be transported in a flat position in its box in order
to prevent damage to the paint. Damage to the paint can lead to corrosion.
The charging station should be stored in a dry area.
22. RESOLVING PROBLEMS
If the charging station is not functioning properly, please contact the
back office provider or contact another certified mechanic with the right
measuring and testing equipment with car simulation.
23. OPERATION AND FUNCTIONING OF THE CHARGING STATION
Before connecting the charging station to power, the back
office provider must be contacted to allow the software to be
activated. The unique charging station number is required for
this.*
*Only applies to charging systems with registration.
As soon as registration has been completed, the charging station can be
used with any type of electronic transport charging card (EV charging card/
charging key) or another suitable fuel card (other options available).
23.1 Operation:
Take the plug from the holder on the charging station and connect the plug
to your vehicle.
The start/stop procedure is started by pressing the button or by holding your
charging pass in front of the scan point.
First, the plug is locked in the vehicle.
The charging station then communicates with the vehicle and with the back
office system. Once all safety and payment conditions have been checked
the maximum allowed charging current is released (depending on the
vehicle, it may take up to 2 minutes before the vehicle starts charging). After
some time the charging station may activate its cooling systems to release
built up heat via the venting channel.
To stop the charging process press the button and hold your pass in front of
the scan point. The charging process will be stopped. You can now remove
the plug and place it in the holder.
23.2 Emergency stop
In the event of an emergency you can press the emergency button.
This will immediately stop the software and hardware charging process.
23
Advertenties
Hoofdstukken
Inhoudsopgave
