Advertenties
OBJ_BUCH-1668-002.book Page 8 Monday, October 21, 2013 3:45 PM
8 | English
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Additional safety warnings
This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the machine by a person responsible for their safety.
F 016 L70 915 | (21.10.13)
Children should be supervised to ensure that they do not
play with the machine.
Never allow children or people unfamiliar with these in-
structions to use the tool. Local regulations may restrict
the age of the operator. When not in use, store the tool out
of reach of children.
Before use check the supply and extension cord for signs
of damage or ageing. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the garden product if the cord is dam-
aged or worn.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified per-
sons in order to avoid a hazard.
Keep extension cords away from cutting elements.
Before using the machine and after impact, check for signs
of wear or damage and repair if necessary.
Never operate the product when you are tired, ill or under
the influence of alcohol, drugs or medicine.
The operator or user is responsible for accidents or haz-
ards occurring to other people or their property.
Work only in daylight or in good artificial light.
Switch off and remove the plug from the socket:
– whenever you leave the machine unattended for any
period
– if the cable is tangled
– before removing the trimmer attachment
This tool must only be used with approved tool attach-
ments.
The extention pole (3 600 H43 D00) intended for use with
the power unit and the Pole Pruning attachment and
Hedgecutter attachment only.
The extention pole must not be used with other attach-
ments.
It is only permitted to use one extension pole per attach-
ment.
After use, disconnect the machine from the mains and
check for damage.
Store the machine in a secure, dry place out of the reach of
children. Do not place other objects on top of the machine.
Electrical Safety
Warning! Switch off, remove plug from mains before
adjusting, cleaning or if cable is cut, damaged or entan-
gled.
Your machine is double insulated for safety and requires no
earth connection. The operating voltage is 230 V AC, 50 Hz
(for non-EU countries 220 V). Only use approved extension
cables. Contact your Bosch Service Centre for details.
It is recommended for increased electrical safety to use a
Residual Current Device (RCD) with a tripping current of
not more than 30 mA. Always check your RCD every time
you use it.
Bosch Power Tools
Advertenties
