Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Cookerhood mounting
1. Remove the packaging and check the appliance for any visible damage.
2. Dismount the glass by removing the nuts (A). (afb.01)
3. Open the service hatch by removing the 6 screws (B). (afb.02)
4. Remove the plug for the control (left cable). (afb.03)
5. Dismount the under plate by removing the screws (C). (afb.04)
6. Determine the centre of the hood over the stove. Use a plumb to mark the centre of
the unit on the ceiling.
7. Use the empty body of the hood as a template to determine the place of the fitting
holes.
8. Drill 4 holes (4x M8) and install the plugs and bolts, let 20mm of thread stick out.
9. Before mounting the body connect the unit to the main power and ducting.
5 possibilities for exhaust air connection (150mmØ)
10. Mount the under plate and connect the plug for the control. Put the Service hatch
back in place and mount the glass.
Advertenties
