Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
knob
Button with
indicator light
Button with
indicator light: press this briefly to switch
the machine on or off. The green indicator light indicates that the
machine is switched on. To switch off the washing machine during
the wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the machine
will not switch off. If the machine is switched off during a wash
cycle, this wash cycle will be cancelled.
direction. To select the most suitable wash cycle, please refer
to the
The knob will not move during the wash cycle.
button: press to modify or exclude the
temperature setting; the value selected will appear on the
display above
the spin cycle; the value selected will appear on the display
above
button: press to set a delayed start for
the selected wash cycle; the set delay time will appear on the
display above
buttons with indicator lights: press to select the
available options. The indicator light corresponding to the
selected option will remain lit
and
"Modifying pre-set parameters" in the chapter "
".
" in the chapter "
icons: these illuminate to indicate the
progress of the wash cycle (Wash
Drain
). The text
lights up when the cycle is complete.
button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the button
All manuals and user guides at all-guides.com
button
button
button
knob: may be turned in either
button: press to modify or exclude
buttons refer to
button refer to "
".
– Rinse
– Spin
button
button
buttons
button
again; the indicator light will flash in an orange colour. If the
“Door locked”
indicator light is switched off, the door may
be opened. To start the wash cycle from the point at which it
was interrupted, press the button again.
porthole door is locked. To open the door, pause the wash
cycle (see “
button with indicator light: to activate or
deactivate the control panel lock, press and hold the button
for approximately 2 seconds. when the indicator light is
illuminated, the control panel is locked. This means it is
possible to prevent wash cycles from being modified
accidentally, especially where there are children in the home.
indicator light: the
washing parameters, an energy saving of at least 10% is made.
Furthermore, before the machine enters “Standby” mode, the
icon will light up for a few seconds; when the machine is switched
off the estimated energy saving will be around the 80% mark.
The first time the machine is switched on, the first language
will flash on the display. The " ", "OK" and "V" symbols will
appear on the display, in line with the 3 buttons on the right-
hand side. The languages change automatically every 3";
alternatively, they can be changed by pressing the buttons next
to the " " and "V" symbols. Use the "OK" button to confirm the
language, which will be set after 2". If no buttons are pressed,
the automatic language change will begin again after 30".
The language may only be changed while the machine is
switched off. Press and hold the temperature
+delayed start
buttons for 5''; a short beep sounds and
the set language flashes on the display. Press the buttons
–
next to the " " and "V" symbols to change the language. Use
the button next to the "OK" symbol to confirm the language,
which will be set after 2". If no buttons are pressed, the
language set previously will be displayed after 30".
Switch on the machine.
button
with indicator light
indicator light
icons
with indicator light
indicator light
indicator light: indicates that the
”).
icon lights up when, after altering the
+spin
button
Advertenties
Inhoudsopgave
