Download Print deze pagina

Maxima MPM 10 Gebruikershandleiding pagina 4

Advertenties

Beschikbare talen

Beschikbare talen

Do not use the machine after it has fallen or is damaged in any other way. Have it checked and repaired by a
certified engineer.
Do not try to repair the machine yourself. This may cause life-threatening situations.
Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. To
pull the plug out of the socket, always pull on the plug and not on the cord.
Keep the power cable away from operating range. Do not lay over carpets or heat insulation and do not
cover the cable.
Always keep an eye on the machine when in use.
Never put your hands near the moving parts of the machine.
Never let children use professional machines without supervision.
Always pull the power plug out of the socket when the machine is not being used.
ATTENTION! As long as the power plug is in the socket the machine is connected to the power source.
Keep all packaging away from children. Dispose of packaging in accordance to the regulations of local
authorities.
Turn off the machine before pulling the power plug out of the socket.
Never try to move or carry the machine by the power cord.
Do not use any extra devices that are not supplied along with the machine.
Avoid overloading the machine.
Do not place the machine on its side, upside-down or tilt the appliance more than 45° from the vertical. Also
not while the appliance is being transported.
The electrical installation must satisfy the applicable national and local regulations.
First Time Use
Unpack and inspect your machine immediately after receipt. If there are any latent defects or damages to
the machine then immediately contact the freight carrier as well as your dealer. Save all packaging materials
for inspection by the freight carrier.
Read this instruction manual completely before attempting to install and operate this product. All
installations and set ups must be done by authorized service agents, your dealer, or Maxima
representatives.
The machine must be positioned on a flat surface with sufficient space around the machine to allow for easy
access to the machine, and for cleaning and ventilation.
If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard
electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your
machine is not supplied with a factory fitted molded plug then a qualified electrical technician must be
contracted to wire the unit to the power supply.
Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
All manuals and user guides at all-guides.com
info@spangenberg.nl
-
www.maximaholland.com

Advertenties

loading