Advertenties
Beschikbare talen
Beschikbare talen
Quick Links
POLLUX LUX
MODEL: 651243 ( CREAM WHITE )
MODEL: 651244 ( SHADOW GREEN )
1. BUTTON
7. LAMP BODY
2. LAMPSHADE
( EXTENDED )
6. EDGE OF LAMPSHADE
UK: INSTRUCTION MANUAL
Light modes:
• Press the button (1.) to switch on / off
• Press and hold the button to dim the
Use of the lamp:
• Connect the USB plug (5.) to a reliable
• To extend lantern lampshade, grab
4. ADJUSTABLE
HANGING POINT
• Hang lamp from the hanging point,
• For indoor use only
• Lamp can be cleaned
5. CORD WITH
• Do not use corrosive
USB PLUG
• Do not stare into the light source
Light source: LED
This product contains a light
source of energy efficiency
class E.
The light source is not replace-
able. This would introduce weak points
in the construction, that could reduce
the lifetime of the product.
3. LAMPSHADE ( COLLAPSED )
the light
light. The light can be dimmed step-
less to any setting between maximum
and minimum light output.
power source.
the edge of the lampshade (6.) and
push the body out from the inside, do
not pull on the cord. To collapse the
lampshade, reverse the above
adjust height as needed by gently
moving the cord through the adjuster
with a damp rag
liquids to clean the lamp
Instruction for removal of light
source gear by market surveillance
authorities:
1) Remove lamp lens by using a flat-
head screwdriver to open the four tabs
2) Unscrew 2 pcs screws holding PCB
with LEDs in place
3) Cut needed wires to remove the
required components for testing
Instruction for disassembly of lamp
for disposal of components
when lamp has reached the
end of its usable life:
- See steps 1-2 above
3) Cut wires and remove screws to allow
removal of electronics on circuit board.
Dispose of electronics according to
local regulations
4) Dispose of remaining components
according to local regulations
Technical data:
5V,
,1.5A, 7.5W
Class 3 appliance
Advertenties
Samenvatting van Inhoud voor Outwell POLLUX LUX
- Pagina 1 • Press and hold the button to dim the 1) Remove lamp lens by using a flat- POLLUX LUX light. The light can be dimmed step- head screwdriver to open the four tabs less to any setting between maximum 2) Unscrew 2 pcs screws holding PCB and minimum light output.
- Pagina 2 1) Entfernen Sie das Lampenglas, Lampe ein- oder auszuschalten. indem Sie die vier Laschen mit einem • Drücken und halten Sie die Taste, POLLUX LUX Schlitzschraubendreher öffnen. um das Licht zu dimmen. Das Licht 2) Die 2 Schrauben, die die Leiterplatte kann stufenlos auf jede beliebige mit den LEDs halten, herausschrauben.
- Pagina 3 1) Fjern lampens linse ved at åbne • Tryk, og hold knappen nede for at de fire skydere ved hjælp af en flad POLLUX LUX dæmpe lyset. Lyset kan dæmpes trin- skruetrækker. løst i alle indstillinger mellem maks.
- Pagina 4 1) Retirez la lentille de la lampe en er / éteindre la lumière. utilisant un tournevis plat pour ouvrir • Appuyez sur le bouton et mainten- POLLUX LUX les quatre languettes. ez-le enfoncé pour varier l’intensité 2) Dévissez 2 vis maintenant le circuit de la lumière.
- Pagina 5 1) Verwijder de lamplens door met een uit te zetten. platte schroevendraaier de vier lipjes • Houd de knop ingedrukt om het licht POLLUX LUX te openen. te dimmen. Het licht kan traploos 2) Draai de 2 schroeven los die de print worden gedimd tot elke stand tussen plaat met leds op zijn plaats houden.
- Pagina 6 • Pro zapnutí/vypnutí svítidla stiskněte tlačítko (1.). 1) Sejměte čočku svítidla pomocí • Pro ztlumení světla tlačítko stiskněte a plochého šroubováku a otevřete čtyři POLLUX LUX podržte. Světlo lze plynule ztlumit na jazýčky. jakoukoli intenzitu od maximální až 2) Vyšroubujte 2 šrouby, které upevňují...
- Pagina 7 1) Ta av lampens linse ved å bruke en • Trykk og hold inne knappen for å skrutrekker med flatt hode til å åpne POLLUX LUX dimme lyset. Lyset kan dimmes trinn- de fire klaffene. løst til en hvilken som helst innstilling 2) Skru løs de 2 skruene som holder...
- Pagina 8 Outwell® is a reg. trademark of Oase Outdoors ApS, EU: Kornvej 9, DK-7323 Give, Denmark, UK: One Glass Wharf, Bristol, BS2 0ZX...