Advertenties
Beschikbare talen
Beschikbare talen
INSTRUCTIONS FOR INSTALLATION
Foreword
Dear Customer,
We would like to thank you for buying this DRU product.
Our products have been designed and produced to meet
the highest possible quality, performance and safety
requirements, allowing you to enjoy years of problem-free
use.
The heater has an enclosed combustion chamber. Its
natural draught draws in the combustion air from outside
through a combined inlet-outlet system.The same natural
draught expels the combustion gasses.
In this booklet you will find instructions for the installation
and use of your new appliance. Please read these
instructions and the manual carefully to familiarize yourself
with the appliance. If you require any further support,
please do not hesitate to contact your supplier.
Unpacking
Once the heater has been unpacked, all packaging should
be disposed of in the regular manner.
Connection
This appliance should be connected by a registered
installer.
INSTRUCTIONS FOR INSTALLATION
Type of gas
This appliance is suitable for G20 or G25 natural gas.
Please check that the local gas and pressure correspond
with the specifications on the type identification tag.The
type identification tag is a metal plate hanging on a chain.
All regulations regarding gas installation, including any local
regulations, must be observed at all times. The appliance is
to be installed by a registered installer.
Important
• Keep curtains and any other flammable materials at least
50cm away form the appliance.
• Caution! Touching the heater when hot can cause burns
and blisters!
• The appliance should be installed and maintained by a
registered installer.
• Do not install any so-called dust filter on or under the
casing.
• Do not hang wet clothes and towels etc. on the heater to
dry.
Positioning the appliance
The gas fire has been designed to be built in tightly into a
newly-built chimney breast of incombustible and heat-
resistant material.To install the appliance, cut a hole 900 mm
All manuals and user guides at all-guides.com
high and 700 mm wide, allowing for the depth of the heater
(350 mm).The overall height will depend on how the
adjustable feet are set. Build the chimney breast accurately
taking the narrow flange on the inside into account.
Unscrew the 3 socket-head screws on the right of the glass
window, using the spanner provided. Lift the glass out of the
hinges and take the box of logs and the bag of accessories
Packing
12
fig. 1
Mantel Iron
70x50x4
Packing
fig. 2
Wandbeugels
Wall brackets
38c-1047
38C-1046
Advertenties
Hoofdstukken
